|
Breeding and Raising the House
Cricket
Achetus domesticus
(HOUSE CRICKET)
By Ian Hallett
Pictures by David Pickering
 
PAGE
CONTENTS
Introduction
Materials Required
Basic Set-Up
Feeding Your Crickets Breeding the Crickets
Incubation of Eggs Rearing Hatchlings
Feeding Out Crickets To Your Herps
PHOTO
LINKS [ Adult, Egg, and Hatchlings ] [ Chick waterer - for cricket watering ] [ Colony Container ] [ Egg flats ] [ Escapee control, the all natural way ] [ Feeding the crickets to your animal ] [ Gut Load Recipe ] [ Nesting container ] [ Rearing Container ]
CLICK ON UNDERLINED TEXT OR ABOVE LINKS FOR PICTURES OF SET UP
Visit CHIRP CHAT Page
The house cricket Achetus domesticus is a staple and
nutritious food
for many herp species. Obtaining a reliable supply of these insects can be a
bother, especially if one requires a constant supply of newly hatched
'pinhead' crickets, to say nothing of the costs of feeding a large collection
with pet-shop-bought crickets. The following article outlines a method for
cricket raising which has been developed over the past two years in order to
provide a collection of frogs (Mantellas, Discophus, and Dendrobates)
with a constant supply of small and large crickets.
There are several things to consider before you decide to raise crickets:
 | The crickets will make a lot of noise. You must have an area to keep
them where this is not a problem.
| Escapes will be inevitable! Eventually you might find yourself falling
asleep (or not falling asleep) to the trill of a cricket courting in the
warmth beneath an appliance in your room. If you live in an apartment your
neighbors may find new, unwanted, tenants in the hallways. Commercial
insecticide pellets such as those used to kill earwigs can be placed in
the room with your cricket colony to prevent escapees from taking over the
house.
| Crickets have a definite odor, but if the colony is well maintained and
kept clean, most people do not find it offensive. A major source of odor
is the cotton wool in the water dishes which can quickly collect droppings
so it must be kept clean. In the method described here, the main colony is
kept dry (no damp substrate) which reduces the smell considerably. |
| |
One of the main problems encountered with most descriptions of cricket
breeding is that the eggs hatch in the same container as the adult breeding
colony, usually in a substrate placed on the bottom of the breeding enclosure.
This requires one to sort the crickets before feeding to various sized
animals. The breeding substrate also quickly becomes littered with dead
crickets and droppings. It is also difficult to keep moist if egg cartons or
other hiding material is placed on top of it.
The method described here provides a removable egg-laying
container,
separating the eggs and adults, thereby raising yields and providing crickets
of various sizes. Depending on the number of crickets desired the system can
be set up in the corner of a room or the bottom of a closet - space is not a
major consideration. The cost to establish a basic system is about $30.00 plus
the cost of the initial breeding colony of crickets. To start such a colony at
least 200 crickets are required, and the colony should not be used for feeding
until well established and your first babies are adult-sized. If you plan to
use some of the crickets for feeding, a batch of 1000 can be purchased quite
inexpensively from a cricket supplier.
The breeding colony is housed in one of the deep (26" x 14" x
16" deep) plastic storage boxes with egg flats inserted vertically
throughout except for about 6 inches at one end where the water dispenser is
located. Other containers may be adapted for this use. No substrate of any
kind is placed in the bottom of this container. Holes (4" x 4") are
cut in opposite ends of the breeding container and covered with metal mosquito
screening secured with duct tape, to provide ventilation. (Do not use
fiberglass screening, the crickets will soon eat through it and escape!
Catching 1000 crickets loose in your apartment is not a task I would
recommend, although I have done it, once). The water dispenser is a commercial
chick waterer which is essentially a plastic jar inverted over a circular
trough which holds the water. Plastic scouring pads or Dacron quilt batting
should be cut to fill the trough. They will soak up water, making it available
to the crickets while preventing them from drowning. The egg flats should
reach to within about 4" of the top of the container. On top of these are
placed two plastic tubs, such as sour cream or yogurt is purchased in. One
contains food and the other contains egg laying
medium. See specific sections
for descriptions of each). A heat pad is placed on top of the lid of the
storage box to provide adequate warmth. Crickets thrive at temperatures higher
than the average house temperature. They prefer 80-90 degrees F (26-32 C). If
you place them in a warm herp room this should provide them with enough heat.
At lower temperatures they will survive and even breed, but yields will be
much reduced. They also seem to live longer at lower temperatures, something
to keep in mind if you find yourself with an excess which you want to keep
alive as long as possible.
Maintenance of the breeding colony comprises of filling the food, keeping the
nesting material damp and filling the water when empty. A 1 liter waterer will
last 4-5 weeks. Every 2 months or so the entire colony and fixtures should be
moved to the second container. The cricket waste and ex-crickets can then be
dumped out of the first container and it can be washed. It is best to do this
outside, if possible, as escapes are inevitable. Over time, cricket droppings
will accumulate on the egg cartons and the cartons will need replacing. The
egg cartons are most easily handled if they are glued together in sets of 4 or
5 for easy removal from the container.
Feeding the crickets the right diet is important for two reasons. Firstly the
crickets need adequate nutrition to survive and breed. Secondly, the nutrition
from the crickets will be passed on to your reptiles or amphibians and so it
is important to keep them healthy. Crickets require a high-protein diet.
Without, and often with, an adequate diet the crickets will prey on each
other.
Commercial cricket foods are available in large and small quantities. The
large sacks of cricket chow may not be available everywhere, check with a
local feed shop. The smaller jars of cricket food sold at pet shops are very
expensive and I have heard mixed results about some brand's quality and
acceptability to the crickets. Tropical fish flakes have also been recommended
as food but the expense is astronomical if you are raising a large number of
crickets.
As an alternative, I use the following recipe. It is inexpensive and several
dollars worth will last several months or more, depending on the number of
crickets you are producing. The same food is used for all sizes of crickets.
The food is based on commercial dried cat food. In addition I provide a
supplement of 10 parts skim milk powder (by volume) to 1 part of a good
quality calcium supplement intended for reptiles and amphibians. The cat food
is shaken in this mixture until coated and then given to the crickets. More
supplement can be sprinkled onto the food as the crickets eat it. To provide a
balanced diet this is supplemented with alfalfa pellets and, whenever
available, raw vegetable scraps. Top up each as they are eaten. The food can
be placed in a small plastic container on top of the egg cartons in the
breeding container. Crickets can be removed and 'gut-loaded' with higher
quality food several days prior to feeding them to your herps if desired.
However, this diet has proved sufficient nourishment for the crickets used to
feed a number of amphibians and several breeding groups of Dendrobatid frogs.
As long as the crickets have food, water and a high temperature they will
breed profusely. Their natural nesting material is damp soil and so to
duplicate this a 500ml (one pint) plastic tub full of moist nesting material
is placed on top of the egg cartons in the breeding container. The nesting
material can be damp sand, peat moss or my favorite 'turf'. 'Turf' or 'tuff'
(it is similar to coarse bonsai soil) is a landscaping material consisting of
small clay based pellets which retain water well. It does not mold as easily
as peat moss.
Since the crickets have no other substrate in the cage, the crickets tend to
burrow into the nesting medium and disturb the eggs. However, if it is packed
gently, the crickets will only disturb the top 1/2" or so and lay their
eggs below. Use a container at least 2-3" deep so the crickets can lay
their eggs down below, where they will not be disturbed. One or more of these
containers can be placed in with the crickets. No matter how many containers
of nesting material are placed in the container, the crickets will inevitably
lay some eggs around the water dish. These generally will not hatch.
The nesting material requires constant attention. It must be checked every few
days and sprayed if dry. Peat will need to be checked far more frequently than
'turf'. The nesting material can dry rapidly due to the heat pad above it.
Once a batch of eggs is completely desiccated it is useless.
After 4-7 days the nesting material will be positively packed with oblate
white eggs positioned vertically about 1-2" below the soil surface. The
nesting dish should then be removed and incubated.
To incubate the eggs, the original lid is placed on the nesting container and
it is placed on the heat pad on top of the breeding container. In about 7-10
days it will be swarming with pinhead crickets and should then be moved to a
rearing container. At this time, the nesting container in with the breeding
colony can be removed and replaced with a new one.
Once the eggs begin to hatch, the nesting container is moved to a small
sweater box (16" x 8" x 4"). The lid of this should have holes
drilled into it about 1" apart. There is little chance that the baby
crickets will escape en masse through the holes, the boxes are usually too
slippery for them to climb and they have little interest in leaving the food
and warmth at the bottom of the container. If there is concern about escapees,
a strip of wide cello-tape or packing tape can be fastened around the entire
inside rim of the container. This is so slippery that the crickets will never
climb it. A few small pieces of egg carton, a jar lid full of food and a jar
lid with cotton wool and water are also placed in the container.
The nesting material must be kept damp and warm while the batch of crickets
hatches - which can take up to a week. Snap the lid off the nesting container
before placing it in the rearing box, but set it loosely back on top, with
spaces for the baby crickets to get out. Without a cover, the nesting material
will dry out and the water will condense inside the rearing container,
drowning the baby crickets. If this is a problem, even with a covering on the
nesting container, place the lid loosely on the rearing container with a gap
to allow the water to evaporate. Put the nesting container at one end or the
rearing container and place it on top of the heat pad to keep it warm.
Thus it is possible to heat the breeding colony, incubate several batches of
eggs, and raise a batch of eggs, all on the same heating pad, within a small
area. The rearing containers require more attention than the breeding colony,
and the water dish must be kept damp with a spraying at least every two days.
There is no doubt room for improvement in this stage of the described process.
Once the eggs have all hatched, the nesting dish is removed, the nesting
material is discarded and the container recycled. Recycling the nesting
material can cause problems with mold and small, mite-like insects infesting
it.
The batch of hatchling crickets can be raised in the sweater box until about
1/2" long. The end result is a batch of several hundred to possibly
thousands of small crickets, all of similar size, and all contained within
their individual rearing container. Successive batches of crickets, each of a
different size are then available to feed to your collection. The number of
batches will depend on the desired output and size. Additional heating pads
can be used to warm stacks of growing crickets.
Once the crickets have reached 1/4" , about 50-75 should be returned to
the breeding container. This is extremely important. The adults live for only
a few weeks and if the breeding colony is not replenished regularly it will
die out or contain only small crickets, unable to breed yet.
The rearing containers will contain small pieces of egg crate, and the
breeding container should also, if you plan to feed adult crickets to your
herps. A 4 liter ( 1 gallon) square water jug works well as a cricket
collector. Remove the bottom from this, and keep the screw lid on to create a
large funnel. Cover any handle holes within the jug with duct tape to prevent
the crickets from hiding in them . Remove one of the small pieces of egg
crate from the cricket containers and shake it within this funnel. Hold the
whole apparatus over the colony as you do this to prevent escapes. Sprinkle in
calcium supplements and vitamins as required, shake gently, and tip the funnel
into the herp cage.
Although these instructions for breeding crickets may sound extensive, an
established colony as described can be maintained with only a few minutes of
attention every few days. It must be stressed that constant care and attention
is required. If you have only a few animals it may be better to purchase
half-sized crickets in bulk and keep and feed them as outlined here.
(Purchasing large numbers of mature crickets is not recommended unless you can
use them in 3-4 weeks - their average life span). The set up as described has
been found to be more than adequate to supply several hundred small (pinhead
to 1/8") crickets and a few dozen adult crickets weekly. Larger outputs
are possible and several breeding colonies can be set up if you have the space
and the need.
© Ian Hallett 1995, 1996
photos by David Pickering
CLICK ON UNDERLINED TEXT FOR PICTURES OF SET UP
Back to Top of Breeding
Visit CHIRP CHAT Page
for more cricket info
|
SUGGESTIONS